On board diagnostics (OBD) has come a long way since its beginning in the 1980s. OBD gives easy bmw ops access to the vehicle owner to information on the state of health
of the vehicle. It also makes the job of the mechanic easy to locate
the problems, if any. In the earlier versions, only the malfunctioning
of a particular section could be reported by an appropriate indicator
light. But the latest edition, OBD2 connector has the ability to
pinpoint the problem. That makes the job for the mechanic much easier
and the cost of maintenance lower for the owner.
An OBD2 cable
bmw ops along with necessary interface and software is used for detailed
diagnostics of the engine. The male plug is connected to the computer of
the car and the female plug is for connecting with the car components
on which the check has to be made. Information collected by the OBD2 sensors is read by the computer
Renault CAN Clip through the OBD2 connector.
For
the most advanced onboard diagnostics, the OBD2, a female 16 pin OBD2
connector is required for standardized interface with hardware. The OBD2
connector must comply with SAE J1962 standards. J1962 standards clearly
specify the function of each pin. Some pins are left with no specific
functions. They are meant to be used at
Digimaster 3 the discretion of the vehicle
manufacturer. The OBD2 connector must be located within 2 feet of the
steering wheel for easy access to the driver. For earlier versions, it was located under the hood.
没有评论:
发表评论